Key Smadi Sonwi Technology News

Posts Tagged ‘12933’

OSPF is a major topic on both the CCNA and CCNP exams, and it’s also the topic that requires the most attention to detail. Where dynamic routing protocols such as RIP and IGRP have only one router type, a look at a Cisco routing table shows several different OSPF route types.
R1#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
In this tutorial, we’ll take a look at the difference between two of these route types, E1 and E2.
Route redistribution is the process of taking routes learned via one routing protocol and injecting those routes into another routing domain. (Static and connected routes can also be redistributed.) When a router running OSPF takes routes learned by another routing protocol and makes them available to the other OSPF-enabled routers it’s communicating with, that router becomes an Autonomous System Border Router (ASBR).
Let’s work with an example where R1 is running both OSPF and RIP. R4 is in the same OSPF domain as R1, and we want R4 to learn the routes that R1 is learning via RIP. This means we have to perform route redistribution on the ASBR. The routes that are being redistributed from RIP into OSPF will appear as E2 routes on R4:
R4#show ip route ospf
Read the rest of this entry »

BGP is one of the most complex topics you’ll study when pursuing your CCNP, if not the most complex. I know from personal experience that when I was earning my CCNP, BGP is the topic that gave me the most trouble at first. One thing I keep reminding today’s CCNP candidates about, though, is that no Cisco technology is impossible to understand if you just break it down and understand the basics before you start trying to understand the more complex configurations.

BGP attributes are one such topic. You’ve got well-known mandatory, well-known discretionary, transitive, and non-transitive. Then you’ve got each individual BGP attribute to remember, and the order in which BGP considers attributes, and what attributes even are… and a lot more! As with any other Cisco topic, we have to walk before we can run. Let’s take a look at what attributes are and what they do in BGP.

BGP attributes are much like what metrics are to OSPF, RIP, IGRP, and EIGRP. You won’t see them listed in a routing table, but attributes are what BGP considers when choosing the best path to a destination when multiple valid (loop-free) paths exist.

When BGP has to decide between such paths, there is an order in which BGP considers the path attributes. For success on the CCNP exams, you need to know this order. BGP looks at path attributes in this order:
Read the rest of this entry »

CCNP exam success, particularly on the BSCI exam, demands you understand the details of route summarization. This skill not only requires that you have a comfort level with binary conversions, but you have to know how and where to apply route summarization with each individual protocol.

You also have to know the “side effects” of route summarization. With OSPF, there will actually be an extra interface created at the point of summarization, and this catches a lot of CCNP candidates by surprise. Let’s take a look at the null0 interface and how it relates to OSPF summarization.

On R1, the following networks are redistributed into OSPF, and then summarized.

interface Loopback16

ip address 16.16.16.16 255.0.0.0

interface Loopback17

ip address 17.17.17.17 255.0.0.0

interface Loopback18

ip address 18.18.18.18 255.0.0.0

interface Loopback19
Read the rest of this entry »