Key Smadi Sonwi Technology News

Posts Tagged ‘bsci’

When you’re studying for the CCNA and CCNP exams, you’ve got a lot of different choices when it comes to training. One popular choice is choosing one of the many “boot camps” and five-day in-person courses that are out there. I’ve taught quite a few of these, and while many of them are good, they do have drawbacks.

Of course, one is cost. Many employers are putting the brakes on paying for CCNA and CCNP boot camps, and most candidates can’t afford to pay thousands of dollars for such a class. Then you’ve got travel costs, meals, and having to possibly burn your own vacation time to take the class. Add in time away from your family and boot camps become impractical for many CCNA / CCNP candidates.

Another issue is fatigue. I enjoy teaching week-long classes, but let’s face facts – whether you’re training for the CCNA or CCNP exams, you’re going to get a lot of information thrown at you in just a few days. You’re going to be mentally and physically exhausted at the end of the week, and that’s when some boot camps actually have you take the exam! You’ve got to be refreshed and rested when you take the exam to have your best chance of success.
Read the rest of this entry »

OSPF is a major topic on both the CCNA and CCNP exams, and it’s also the topic that requires the most attention to detail. Where dynamic routing protocols such as RIP and IGRP have only one router type, a look at a Cisco routing table shows several different OSPF route types.
R1#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
In this tutorial, we’ll take a look at the difference between two of these route types, E1 and E2.
Route redistribution is the process of taking routes learned via one routing protocol and injecting those routes into another routing domain. (Static and connected routes can also be redistributed.) When a router running OSPF takes routes learned by another routing protocol and makes them available to the other OSPF-enabled routers it’s communicating with, that router becomes an Autonomous System Border Router (ASBR).
Let’s work with an example where R1 is running both OSPF and RIP. R4 is in the same OSPF domain as R1, and we want R4 to learn the routes that R1 is learning via RIP. This means we have to perform route redistribution on the ASBR. The routes that are being redistributed from RIP into OSPF will appear as E2 routes on R4:
R4#show ip route ospf
Read the rest of this entry »

BGP is one of the most complex topics you’ll study when pursuing your CCNP, if not the most complex. I know from personal experience that when I was earning my CCNP, BGP is the topic that gave me the most trouble at first. One thing I keep reminding today’s CCNP candidates about, though, is that no Cisco technology is impossible to understand if you just break it down and understand the basics before you start trying to understand the more complex configurations.

BGP attributes are one such topic. You’ve got well-known mandatory, well-known discretionary, transitive, and non-transitive. Then you’ve got each individual BGP attribute to remember, and the order in which BGP considers attributes, and what attributes even are… and a lot more! As with any other Cisco topic, we have to walk before we can run. Let’s take a look at what attributes are and what they do in BGP.

BGP attributes are much like what metrics are to OSPF, RIP, IGRP, and EIGRP. You won’t see them listed in a routing table, but attributes are what BGP considers when choosing the best path to a destination when multiple valid (loop-free) paths exist.

When BGP has to decide between such paths, there is an order in which BGP considers the path attributes. For success on the CCNP exams, you need to know this order. BGP looks at path attributes in this order:
Read the rest of this entry »

Planning for success on the CCNA, CCNP, and other Cisco exams is much like taking a trip in your car. You’ve got to plan ahead, accept the occasional detour, and just keep on going until you get there. But what do you do before you get started?

Create a road map – for success.

If you were driving from one side of the country to another, you certainly wouldn’t just get in your car and start driving, would you? No. You would plan the trip out ahead of time. What would happen if you just got in the car and started driving in the hope that you would someday arrive at your final destination? You would never get there, and you’d spend a lot of time wandering aimlessly.

Don’t spend your study time and slow your progress by studying for a Cisco exam without planning the trip. Schedule your study time as you would an appointment with a client, and keep that appointment. Make sure that your study time is quality study – turn your TV, iPod, and cell off. If you hit a bump in the road and don’t get your certification the first time you take the exam, regroup and create another plan. Study until you get to the point that on exam day, you know that you are already a CCNA or CCNP and you’re just there at the testing center to make it official.
Read the rest of this entry »