Key Smadi Sonwi Technology News

Posts Tagged ‘cisco’

BGP is one of the most complex topics you’ll study when pursuing your CCNP, if not the most complex. I know from personal experience that when I was earning my CCNP, BGP is the topic that gave me the most trouble at first. One thing I keep reminding today’s CCNP candidates about, though, is that no Cisco technology is impossible to understand if you just break it down and understand the basics before you start trying to understand the more complex configurations.

BGP attributes are one such topic. You’ve got well-known mandatory, well-known discretionary, transitive, and non-transitive. Then you’ve got each individual BGP attribute to remember, and the order in which BGP considers attributes, and what attributes even are… and a lot more! As with any other Cisco topic, we have to walk before we can run. Let’s take a look at what attributes are and what they do in BGP.

BGP attributes are much like what metrics are to OSPF, RIP, IGRP, and EIGRP. You won’t see them listed in a routing table, but attributes are what BGP considers when choosing the best path to a destination when multiple valid (loop-free) paths exist.

When BGP has to decide between such paths, there is an order in which BGP considers the path attributes. For success on the CCNP exams, you need to know this order. BGP looks at path attributes in this order:
Read the rest of this entry »

To earn your CCNA or CCNP certification, you’ve got to understand the basics of trunking. This isn’t just a CCNA topic – you must have an advanced understanding of trunking and etherchannels to pass the BCMSN exam and earn your CCNP as well. Before we address those advanced topics, though, you need to master the fundamentals!

A trunk allows inter-VLAN traffic to flow between directly connected switches. By default, a trunk port is a member of all VLANs, so traffic for any and all VLANs can travel across this trunk. That includes broadcast traffic!

The default mode of a switch port does differ between models, so always check your documentation. On Cisco 2950 switches, every single port is in dynamic desirable mode by default, meaning that every port is actively attempting to trunk. On these switches, the only action needed from us is to physically connect them with a crossover cable. In just a few seconds, the port light turns green and the trunk is up and running. The command show interface trunk will verify trunking.

How does the receiving switch know what VLAN the frame belongs to? The frames are tagged by the transmitting switch with a VLAN ID, reflecting the number of the VLAN whose member ports should receive this frame. When the frame arrives at the remote switch, that switch will examine this ID and then forward the frame appropriately.

There are two major trunking protocols you must understand and compare successfully, those being ISL and IEEE 802.1Q. Let’s take a look at the details of ISL first.

ISL is a Cisco-proprietary trunking protocol, making it unsuitable for a multivendor environment. That’s one drawback, but there are others. ISL will place both a header and trailer onto the frame, encapsulating it. This increases the overhead on the trunk line.

You know that the default VLAN is also known as the “native VLAN”, and another drawback to ISL is that ISL does not use the concept of the native VLAN. This means that every single frame transmitted across the trunk will be encapsulated. Read the rest of this entry »

I was reading The Big Moo: Stop Trying To Be Perfect and Start Being Remarkable this morning, and I’d recommend a copy of this to anyone who wants to improve their career and their future. And that’s all of us, right?

There was one particular line that really stood out to me: Betting on change is always the safest bet available. That describes life perfectly, but it also describes a career in Information Technology perfectly as well. There is no field in the world that has the constant and never-ending changes that IT does. And every single one of us can look at this as a massive opportunity for personal and professional growth.

Is that how you’re looking at it? I remember when I passed my first certification exam, the Novell CAN, back in 1997. Man, I thought I knew it all then! But I quickly learned that you’ve got to keep learning in IT. I also learned that if you’re willing to put in the work and make the sacrifices, there’s no other field with the limitless potential for growth and excellence.

Like everyone else, my career has had its ups and downs, but I always kept learning and growing. Today, I’ve got my dream job, working with studI was reading The Big Moo: Stop Trying To Be Perfect and Start Being Remarkable this morning, and I’d recommend a copy of this to anyone who wants to improve their career and their future. And that’s all of us, right?

There was one particular line that really stood out to me: Betting on change is always the safest bet available. That describes life perfectly, but it also describes a career in Information Technology perfectly as well. There is no field in the world that has the constant and never-ending changes that IT does. And every single one of us can look at this as a massive opportunity for personal and professional growth.

Is that how you’re looking at it? I remember when I passed my first certification exam, the Novell CAN, back in 1997. Man, I thought I knew it all then! But I quickly learned that you’ve got to keep learning in IT. I also learned that if you’re willing to put in the work and make the sacrifices, there’s no other field with the limitless potential for growth and excellence.
Read the rest of this entry »

Planning for success on the CCNA, CCNP, and other Cisco exams is much like taking a trip in your car. You’ve got to plan ahead, accept the occasional detour, and just keep on going until you get there. But what do you do before you get started?

Create a road map – for success.

If you were driving from one side of the country to another, you certainly wouldn’t just get in your car and start driving, would you? No. You would plan the trip out ahead of time. What would happen if you just got in the car and started driving in the hope that you would someday arrive at your final destination? You would never get there, and you’d spend a lot of time wandering aimlessly.

Don’t spend your study time and slow your progress by studying for a Cisco exam without planning the trip. Schedule your study time as you would an appointment with a client, and keep that appointment. Make sure that your study time is quality study – turn your TV, iPod, and cell off. If you hit a bump in the road and don’t get your certification the first time you take the exam, regroup and create another plan. Study until you get to the point that on exam day, you know that you are already a CCNA or CCNP and you’re just there at the testing center to make it official.
Read the rest of this entry »